Shipping Information:
Drum Jumpers are shipped with the following items:
- 1 - Shipping Container/storage container (Remove bottom screws and lift top from base)
- 2 - 6' Long mix and discharge hoses
- 1 - 6' Long return hose
- 2 - 1" Hose plugs
- 1 - 3/4" Hose plug
- 1 - Slump meter plug
- 2 - Adjustable wrenches
- 2 - Ratchet straps to secure the Drum Jumper to mixer fender
- 1 - Neoprene cushion
- 1 - Gas can
**THE DRUM JUMPER IS SHIPPED WITHOUT HYDRAULIC OIL**
The Drum Jumper's standard 6' pressure hoses are cut to a length suitable for front discharge mixer operation. If you have rear discharge mixers you may need extension hoses. With the Drum Jumper near the rear of the truck on the mixer fender, the extension hoses must be long enough to reach your mixer hydraulic drive motor. It is recommended extension hoses are not to exceed 12' in length. Extension hose kits are available from RSW Companies, LLC.
It is VERY IMPORTANT you inspect your mixer fleet and verify hose fitting sizes on the hydraulic drive motors. If you have sizes different than what is provided, you will need to get the proper adapters and add them to your Drum Jumper storage container.
